Description

This is NEW as pictured, Coupling from Grinnell , never used or damaged. Info: Technical Data Approvals UL and ULC Listed FM Approved VdS Approved LPCB (Cert. Nos. 669a and 673a) See Table A for details. Sizes 1 in. to 12 in. (DN25 to DN300) Housing Ductile iron conforming to ASTM A536, Grade 65-45-12 Finish • Orange non-lead paint • Red non-lead paint • Hot-dipped, Galvanized conforming to ASTM A153 Bolts/Nuts • ANSI: Carbon Steel oval neck track head bolts are heat-treated and conform to the physical properties of ASTM A183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 110,000 psi. Carbon Steel heavy hex nuts con form to the physical properties of ASTM A183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zinc electroplated conforming to ASTM B633. Stainless Steel bolts and nuts are available upon request. • Metric: Carbon Steel oval neck track head bolts (Gold color coded) are heat treated and conform to the physical properties of ASTM F568M with a minimum tensile strength of 760 MPa. Carbon Steel heavy hex nuts con form to the physical properties of ASTM A563M Class 9. Bolts and nuts are zinc-electroplated conform ing to ASTM B633. Gaskets • Pre-lubricated Grade “A” EPDM, Violet color code, -30°F to 150°F (-34°C to 66°C) For dry and freezer systems, lubrica tion is required. Refer to Installation Manual IH-1000FP for details. • Tri-Seal Grade “E” EPDM, Green color code, -30°F to 230°F (-34°C to 110°C) Buyer Information: We will ship your item(s) after your payment has been cleared, to a confirmed address. If an item arrives damaged, keep everything sent to you, and contact us within 30 days after receiving item. If you are satisfied with your transaction with us, please leave your comment and we will be sure to reciprocate. Please contact us with any concerns before leaving neutral or negative feedback, we will ensure complete satisfaction.